Sandvik DP1500i is an intelligent, hydraulic, self-propelled, crawler-based surface top hammer drilling rig.
Fully equipped, the new generation rig produces a range of drilling information including the condition of the drill and the work performed. Clever drilling parameter set up, an advanced ROPS/FOPS certified safety cabin, excellent visibility and step by step trouble shooting instructions make drilling a pleasure.
The DPi series technical solutions also respect the environment. Compared with similar conventional models, the DPi rigs consume 15% less fuel. For a standard 2500 annual engine hours, this would result in a reduction of 35 tons in CO2 emissions.
Features and values
- Intelligent production drill rig
- Advanced user interface
- Easily adjustable drilling control system
- Excellent stability due to optimized center of gravity
- Smart component layout and gullwing-type doors for ease of service
- Excellent visibility
- Remote access ready
- Low fuel consumption, low CO2 emissions
Key specifications
| Hole range | 89-152 mm (3 1/2 - 6 in) |
| Drill steel | 51, 60 mm MF rods (2 in, 2 3/8 in) 76 mm, 87 mm Tubes (3 in, 3 1/2 in) |
Weight
| 21 800 kg (48 061 lbs) |
Dimensions
| Width | 2.5 m (8.2 ft) |
| Height | 3.2 m (10.6 ft) |
| Length | 11.5 m (37.7 ft) |
Major Components
| Rock drill | HL1560T 33 kW (44.3 hp) |
| On-board compressor | 14 cu.m/min/up to 10 bar (494 cfm/min/145 PSI) |
| Dust collector | 35 cu.m/min at 1200 mm vacuum H2O (1236 cfm/min at 47 in vacuum H2O) |
| Engine | Caterpillar C11 ACERT 261 kW (350 hp)/1 800 rpm Caterpillar C13 TIER4 287 kW (385 hp)/1 800 rpm |
| Production capacity | 2.0 Mt/year |
