Sandvik HR110 (former HM110) unit handling rollers' deep-drawn end caps of steel are pressed inside the shell. Sprockets are manufactured as machined from the same preform with the bearing housing and secure the precision of the sprockets and the straightness against the chain, as well as good load carrying capacity.
Standard surface treatment is zinc-plated. Guiding rings are included only on special request.
Features and values
- Competitive standard roller for roller conveyors.
- Greased for life.
- Maintenance-free.
- Efficient sealing system.
- Maintenance-free.
Models
HR110 - GA/GAK
These rollers are without shaft, which results in high loading capacity. They have pressed deep-drawn bearing holders and plastic adapters. Surface is either unfinished or zinc-plated.
The shaft adapters can be supplied with internal screw thread M10 or M12 which enables fast and easy installation.
Also available with chain wheels for piece good handling purposes. If required, guiding rings can added on the roller.
Key Specifications
| Roller diameter | 80, 88.9 mm |
| Shaft diameter | with shaft adapter |
| Roller length | 100-1300 mm |
HR110 - GSR/GLR
With pressed deep-drawn bearing holders and various types of shaft ends. Surface is either unfinished or zinc-plated.
This roller is available also with chain wheels for piece good handling purposes. If required, guiding rings can be added on the roller.
Key specifications
| Roller diameter | 50, 60 mm |
| Shaft diameter | 10, 12 mm |
| Roller length | 100-1500 mm |